Why buy a Demco Side Dump Trailer? 1) Low Center of Gravity - the bottom of the tub sits inside and below the top of the chassis frame rails Stability when pulling and cornering and the tires stay grounded when dumping Reduces the risk of tipping over the trailer during the dump cycle without sacrificing the proper dump angle and creates a lower loading height. 2) 3 Pivot points on each side of the trailer the tub rotates on It evenly distributes the pressure of the dump Improves the stability and longevity of your trailer 3) The only trailers you can change directions right form the driver's side You cannot accidentally unlatch all four corners of the tub at once. This action could cause considerable expense or safety issues by wrecking the tub, cylinder, or even dump on the wrong side than originally intended 4) The trademarked FlexCorner design allows for flexibility to maintain the structural integrity of the tub and eliminates cracking of the welds The corners allow the trailer to flex between the main corners and the G-Rail when transporting and dumping The flex at the corners are like shock absorbers and eliminate the need for added welds and repair 5) Faster unloading The Demco SD have cylinders located at each end of the tub. The design can speed up cycle time 6) CORSOL® corrosion solutions **Air Ride Suspension** Maximum maneuverability and stability is offered by our quint axle trailers. With our Twin 20" deep I beams and hour glass cross members for built in flexibility and a rounded dump body design, these quint axle side dumps can hold a wide variety of loads and dump them with optimal clean-out efficiency. The sturdy, massive single g-rail design makes the tub sturdier and lighter for long-lasting use. **SPECIFICATIONS** Air Ride: SAF Holland CBX23-245 Air Suspension with Integrated Axles 23K Axles with Wabco ABS brakes (single axle) and 10 bolt hub piloted steel rims, 75,000 lbs. GVW 5" Dia. Dump Cylinder 43K# Payload @2250 psi 1/4" AR450 Steel with trademarked FlexCorner® Design **FEATURES** Low center of gravity for stability Massive Single G-Rail Six Integrated Tub Pivot Points with Greaseless Pivot Bearings Single Sided Dump Change Quick Left to Right Dump Change Dump Direction Indicators 20" Deep I-beam Chassis Frame Rounded Vee Dump Body Design EdgeFlex Fenders Bolt-On UnderRide Brake size: 16.5" x 7" Large Body Side Stiffener, Maintain 102" Loaded 20 Sec. Dump Time (30 Sec. Cycle) @33 GPM Hydraulic Flow 77-1/2" Track w/ABS on one Axle (23K#) LED Lighting ------------------ **INSTALLED OPTIONS** Charcoal Custom Paint Color Demco Push Block & Stub Bumper **TIRE & RIM OPTIONS** 11R 22.5 LRJ Import Radial Tires * 385/65R 22.5 LRJ Import Radial Tires * All Polished Aluminum Rims * Outside Polished Aluminum Rims, Inside Steel Rims * **TARP OPTIONS** Black Mesh Tarp (Aero) Tarp Lock-Out Kit (with Electric over Hydraulics ONLY) **LIFTS** * 11R 22.5 Single Front & Rear Steerable Lift.